Maintenance
Description
item No.
2DF
1-4-50
U500 Setting the limit on data size for email transmission
Description
Sets the limit on the amount of data (number of originals) sent via email from the optional network scanner.
Purpose
To change the setting according to the network environment.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the desired transmission capacity. The selected item is displayed in reverse.
Display Setting
LITTLE 512 K bytes
MEDIUM 51024 K bytes
LARGE 2048 K bytes
UNLIMITED 999 number-of-sheets restrictions
Initial setting: LITTLE
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U501 Setting image area
Description
Implements the command to cut the area around the image when sending image data to the optional network
scanner.
Purpose
To disable image cut.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display Setting
ON Cuts the image area (6.5 mm)
OFF Does NOT cut the image area
Initial setting: ON
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-49-1
To Next Page
Loading...
