Kyocera KM-2530 - Page 105

CHAPTER 6 COPIER MANAGEMENT
6-31
•
Manual exposure adjustment (Photo)
Adjust the overall exposure level for the “Photo” manual expo-
sure mode.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Manual exposure adjustment (Photo)” in the set-
ting item list at the left-hand side of the screen, and then
touch the [Change #] key.
The “Manual exposure adjustment (Photo)” screen will
appear.
Touch the [Lighter] or [Darker] key to adjust default set-
ting of copy exposure.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
•
Manual exposure adjustment (Text)
Adjust the overall exposure level for the “Text” manual exposure
mode.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Manual exp. adj. (Text)” in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The “Manual exp. adj. (Text)” screen will appear.
Touch the [Lighter] key or [Darker] key to adjust default
setting of copy exposure.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications