Kyocera KM-2560

FAX Operation (Advanced)
5-62 OPERATION GUIDE
1
Register the encryption key you have arranged with the receiving system.
(Refer to Registering an Encryption Key on page 5-60.) When an
encryption key has already been registered, go to the next step.
2
Press the Send key.
3
Place the originals.
4
Press [FAX No. Entry].
5
Use the numeric
keys to enter fax
number of the other
party, and press
[Encrypted
Transmission].
NOTE: When encrypted transmission has been set to a destination in the
Address Book or One-touch keys, you can use the destination.
6
Press [On] and
select the encryption
key number.
7
Press [OK] and go to step 10. When the selection of an encryption box is
required by the other party, press [Encryption Box] and go to the next step.
NOTE: When the machine receives originals, the encryption box is not
used.
Status
OK
6/6/2006 10:00
Print faxes on both sides
of the page.
Sub Address
Transmission
Start Speed
ECM
Encrypted
Transmission
CancelNext Dest.Add to Addr Book
Add a new FAX destination.
Enter the FAX number with the numeric keys.
FAX No. Entry
Destination
On Hook
123456789
0
Ready to send.
Enter Destination.
SpacePause Back Space
Status
OK
6/6/2006 10:00
Off
Cancel
FAX No. Entry - Encrypted Transmission
Destination
On
Encryption Key No.
Not Use
Encryption
Box
0
1/1
Key
Key
Ready to send.
Enter Destination.
01
02