Kyocera KM-2560

Setup and Registration
7-2 OPERATION GUIDE
Rings
You can change the number of times to let the phone ring before
answering a call as needed. The number of ringing times can be changed
independently for each receiving mode of Auto (Normal), Auto (TAD) and
Auto (FAX/TEL).
NOTE: The number of ringing times can be set to between 1 and 15
times for Auto (Normal) and Auto (TAD), and 0 and 15 times for Auto
(FAX/TEL).
For Auto (FAX/TEL), this change is possible only with inch models.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Reception and then press [Next] of FAX.
Press [Change] for the reception mode to be changed.
3
Press [+]/[-] or the
numeric keys to
enter the number.
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
FAX - Rings(Normal)
Set number of times to let phone ring before answering a call
when in Auto (Normal) receiving mode.
Use [-]/[+] or the numeric keys to enter a number.
Cancel OK
ring(s)
6/6/2006 10:00
(1-15)
2