Kyocera KM-2560

Preparation Before Use
OPERATION GUIDE 2-5
Local FAX Information Entry
Next, register the Local FAX Information (Local FAX Number/Local FAX
ID). The Local FAX Number is printed on faxes on the receiving system,
and allows the receiving side to easily recognize where the origins are sent
from. The Local FAX ID is used for transmission limit purposes. (Refer to
Transmission Restriction on page 5-49.)
NOTE: If you install the Dual FAX option and then use 2 phone lines, you
can register Local Fax Numbers for each of the lines.
To change the registration contents, follow the same operation.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Transmission, and then [Next] of FAX.
When you register the Local FAX Number, go to next step. When you
register the Local FAX ID, go to step 6.
Local FAX Number Entry
3
Press [Change] of Local FAX Number 1 or Local FAX Number 2 (option).
If you have already registered a number, the current registered number is
displayed.
4
Using the numeric
keys, enter the local
number to register.
• Up to 20 digits can be entered.
• Press [Space] to enter a space.
•Use [W] or [X] to move the cursor.
• Pressing [Back Space] deletes the character to the left of the cursor.
5
Press [OK].
Local FAX ID Entry
6
Press [Change] of Local FAX ID.
The entry screen is displayed.
Status
FAX - Local FAX Number
Cancel OK
6/6/2006 10:00
12345678
Register or edit local FAX number.
Use the numeric keys to enter a number.
Back SpaceSpace