FAX Operation (Application)
OPERATION GUIDE 4-9
Chain Dial
Chain dial is a function that allows you to dial by linking fax numbers of the
receiving systems with a chain number created with a number common to
several destinations. By setting a toll free number and an area code to a
chain number, you do not need to enter such numbers for each
transmission.
NOTE: You can use the chain number at the head of the fax number of
the receiving system.
It is convenient to register chain numbers that are used frequently to the
Address Book or One-touch keys. For registration to the Address Book,
refer to Registering a New Destination on page 3-16. For registration to
One-touch keys, refer to Registering a New One-touch Key on page 3-27.
As an example, when using ‘212’ as the chain number
1
Press the Send key.
2
Place the originals.
3
Press [FAX No. Entry], and enter ‘212’ using the numeric keys, and press
[OK]. To use the Address Book or One-touch keys, select the destinations
to which ‘212’ has been registered.
NOTE: For the Address Book and One-touch keys, refer to Using the
Address Book on page 3-16 and Using One-touch Keys on page 3-27.
4
From the destination
display, select the
destination to which
‘212’ has been
registered, and
press [Chain].
5
Enter the fax number to connect to the chain number.
Use the numeric keys to enter a fax number
1 Press [FAX No. Entry]. ‘212’ is already entered, and then enter the
fax number. Press [Next Dest.] to enter the next fax number.
2 After entering all the destinations, press [OK].
Status
6/6/2006 10:00
Ready to send.
Destination
Destination
Detail
Address Book
FAX No.
Entry
Folder Path
Entry
E-mail
Addr Entry
Chain
Detail/Edit Delete Recall
Destination Quick Setup
Type of Original/
Transmission
Color/Image
Advanced
Setup
1
1/1
1/10
001 002 003 004 005
006 007 008 009 010
Free
A OFFICE
Free 212
No.
i-FAX
Addr Entry
To Next Page
Loading...
