Kyocera KM-2560

Appendix-2 OPERATION GUIDE
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch
panel following the steps as explained below.
NOTE: QWERTY, QWERTZ and AZERTY are keyboard layouts the
same as a PC keyboard are available. If necessary, change the layout.
For information on how to change layouts, refer to the machine’s
Advanced Operation Guide. QWERTY layout is used here as an example.
You may use another layout following the same steps.
Entry Screens
Lower-case Letter Entry Screen
Use the keyboard to enter.
Limit: characters
Backspace
Lower-case No./Symbol Space
Cancel OK
Upper-case
Status
6/6/2006 10:00
Input: characters
0
32
Account Name
1 2 3 4 5 6 7 8 9 0 -= `
q w e r t y u i o p [ ]
a s d f g h j k l ; ·
z x c v b n m, . /
JIKL
1
5
2
4
6 7 8 9 10 11
3
No. Display/Key Description
1 Display Displays entered characters.
2 Limit / Entry
Display
Displays maximum number of characters
and the number of characters entered.
3 Cursor Key Press to move the cursor on the display.
4 [Backspace] Press to delete a character to the left of the
cursor.
5 Keyboard Press the character to enter.
6 [Upper-case] Press to use upper-case letters.
7 [Lower-case] Press to use lower-case letters.
8 [No./Symbol] Press to enter numbers and symbols.
9 [Space] Press to insert a space.