Kyocera KM-2560

FAX Operation (Basic)
3-14 OPERATION GUIDE
Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed
transmissions immediately rather than waiting for the specified time, use
the procedure below.
1
Press the Status/Job Cancel
key.
2
Press [Sending Jobs], and then [Scheduled Job].
3
To cancel a delayed
transmission, select
the job to be
cancelled and press
[Cancel].
When the cancel
confirmation screen
appears, press
[Yes].
Transmission is
canceled.
To send delayed transmission immediately, select the job to be sent and
press [Start Now].
When the send confirmation screen appears, press [Yes].
Transmission begins.
Cancelling Direct Transmission
During direct transmission, to cancel communication during transmission,
press the Stop key on the operation panel or [Cancel] on the touch panel.
The originals that have been scanned are ejected, and the screen returns
to the send default screen. When originals remain in the document
processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line
during communication, use the following procedure.
Status
6/6/2006 10:00
Printing Jobs Sending Jobs Storing Jobs Device/
Communication
Paper/Supplies
Status Scheduled Job
Log
Job No.Accepted Time Type Destination User Name
Start Time
Cancel Detail
1/1
Status
12:00
000007 9:30 A OFFICE
Start Now
Executing TX job . 7