Preparation Before Use
2-4 OPERATION GUIDE
Local FAX Name Entry
When you enter the Local FAX Name, the name is printed on faxes on the
receiving system. The receiving side can then easily recognize where the
originals are sent from.
NOTE: To change the entry, follow the same operation.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Transmission, [Next] of Basic, and then
[Change] of Local FAX Name Entry. The entry screen will be displayed.
3
Enter the Local FAX
Name to be
registered. Up to 16
characters can be
entered.
NOTE: For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Use the keyboard to enter.
Limit: characters
Backspace
z
Lower-case No./Symbol Space
Cancel OK
xcvbnm ./
;l
,
·kjhfdgsa
po[iuyretwq ]
09-87643521 =`
Upper-case
Status
6/6/2006 10:00
Input: characters0
16
Local FAX Name Entry
LKIJ
To Next Page
Loading...
