Kyocera KM-2560

FAX Operation (Basic)
OPERATION GUIDE 3-13
Cancelling Communication
The method for cancelling communication with this machine differs
depending on the transmission method (memory transmission or direct
transmission) and communication form. Methods of cancelling in various
cases are explained here.
Cancelling Memory Transmission (while originals are being scanned)
During memory transmission, to cancel scanning while originals are being
scanned, press the Stop key on the operation panel, or press [Cancel] on
the touch panel. Scanning of originals is canceled, and the originals are
ejected. When originals remain in the document processor, take them out
from the original output table.
Cancelling Memory Transmission (during communication)
During memory transmission, to cancel communication after it has started
following the completed scanning of originals, use the following procedure.
NOTE: You can cancel transmission by disconnecting the telephone line.
For details, refer to Cancelling Transmission (Disconnection of
Communication) on page 3-14.
1
Press the Status/Job Cancel
key.
2
Press [Sending Jobs].
3
Select the job you
want to cancel, and
press [Cancel].
When the cancel
confirmation screen
appears, press
[Yes].
Communication is
canceled.
Status
6/6/2006 10:00
Printing Jobs Sending Jobs
Storing Jobs Device/
Communication
Paper/Supplies
Status Scheduled Job
Log
All
Job No.Accepted Time Type Destination User Name Status
Cancel
Detail
1/1
Status
Sending
Executing TX job .
000001 10:00 1111
Job Type
1