Setup and Registration
OPERATION GUIDE 7-3
Volume Adjustment
Adjust the volume of the speaker and monitor.
Speaker Volume: Volume of the built-in speaker when the line is
connected by pressing [On Hook].
Monitor Volume: Volume of the built-in speaker when the line is
connected without pressing [On Hook] such as in memory transmission.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Sound and then [Change] of FAX
Speaker Volume or FAX Monitor Volume.
3
Select any of [1]
(Minimum), [2]
(Medium), [3]
(Maximum) or [0]
(Mute).
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
Common Settings - FAX Speaker Volume
Set the FAX speaker volume level.
Cancel OK
Mute
6/6/2006 10:00
Minimum Medium Maximum
01 2 3
To Next Page
Loading...
