Kyocera KM-2560

FAX Operation (Application)
OPERATION GUIDE 4-7
Standby Transmission
During a communication, you can scan originals and schedule a next
transmission. When the first communication is completed, the machine
automatically starts the scheduled next transmission. When using standby
transmission, you do not need to wait when a communication has
prolonged due to broadcast transmission.
NOTE: Together with delayed transmission and interrupt send, up to 200
transmissions can be scheduled.
You can use other functions such as broadcast transmission.
1
Press the Send key.
2
Place the originals.
3
Select the destination, and set transmitting functions if you want to use
any.
4
Press the Start key. Scanning of the originals starts, and the next
transmission is scheduled.
5
When the communication is completed, the scheduled transmission will
begin.