Other Features of this Fax
5-17
4
Press an unregistered key.
NOTE: The subaddress will be
displayed for all keys that have already
been registered.
5
Use the numeric keys to enter the
subaddress 4-digit that you want to use
for this F-Code Confidential Box.
6
Press the [Password] key and enter the 4-digit F-Code password that you want to use for this
F-Code Confidential Box.
IMPORTANT: The password can include any combination of the numerals 0 - 9 and the symbols *
and #.
If you register ‘0000’ as the F-Code password, it will not be necessary to enter a password when
you print out documents from that F-Code Confidential Box.
7
If you want to use the NW-FAX
Reception function, press the [On] key. If
not, press the [Off] key and proceed the
next step.
8
Press the [Confirm] key.
The message display will return to the same screen as was displayed in step 4. If you want to
continue registering other F-Code Confidential Boxes, repeat steps 4 through 8. Once you are
finished registering F-Code Confidential Boxes, press the Reset key.
Modifying or Deleting F-Code Confidential Boxes
Perform the following procedure when you want to modify the registered subaddress or F-Code
password for an F-Code Confidential Box, as well as when you want to completely delete one of
those boxes.
NOTE: In order to modify the contents of or completely delete an F-Code Confidential Box, it is
necessary to enter the corresponding F-Code password during the procedure.
You CANNOT delete an F-Code Confidential Box which still contains received documents.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
Subaddress confi. box
1234.
Register box
0688.
1111.
1/7.
Subaddress/password
Password
Enter using # key.
Back
Register box
Subaddress
00 0 0 .
0000. ( 4 digits)
( 4 digits)
Subaddress confidential box003.
Off
On
NW-FAX rece.
ssword
# key.
Back Confirm
To Next Page
Loading...
Need help?
General
