Various Settings and Registration
7-11
Setting the Default Transmission Mode (TX Mode/Default setting)
You can select which transmission mode, Memory Transmission or Direct Feed Transmission, will
be the default setting in this fax.
If you select Dir. Feed Tx here, the [Dir. Feed Tx] key will be shown in the basic fax screen.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Press the System Menu/Counter key. The System
Menu / Counter screen will appear.
2
Press the [Fax Default] key.
3
Press the [T] cursor key until TX Mode/Default is highlighted.
4
Press the [Change #] key.
5
Select the desired transmission mode
setting by pressing either the [Memory
TX] key or the [Dir. Feed Tx] key, as
appropriate.
6
Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
Print
System Menu / Counter
TX Mode/Default
Memory TX
Dir. Feed
TX
System Menu / Counter
Back
To Next Page
Loading...
Need help?
General
