Fax Operation (Various Functions)
3-23
Initiating the Fax Connection Manually (Manual Fax Transmission)
Once you are connected with the destination party, transmission can be initiated manually by
pressing the Start key.
Use this mode when you want to talk to the other party prior to actual transmission of the
documents, or when the other party must manually switch to fax reception.
NOTE: Speaking to the other party and/or performing Manual Fax Transmission is only possible if a
separately purchased telephone is connected to this fax machine.
If you want to cancel the procedure part way through, press the [On-hook] key or hang up the
receiver.
1
Set the documents you want to transmit in the
Document Processor.
NOTE: It is not possible to set documents on the
platen with this mode.
2
Pick up the telephone receiver or press the [On-hook]
key.
NOTE: If you pressed the [On-hook] key, that key will
be highlighted.
3
Dial the destination fax number.
4
Check whether or not you are connected to a fax machine.
To Next Page
Loading...
Need help?
General
