Various Settings and Registration
7-21
Registering the Remote Test ID (Remote Test ID setting)
If you have entered into a contract with an authorized service center for their Remote Diagnosis
service, it is necessary to register here in advance the Remote Test ID that they designate for you.
NOTE: A previously registered Remote Test ID can also be modified by performing the following
procedure.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Press the [Register] key. The Register
screen will appear.
2
Press the [Remote Test ID] key.
3
Use the numeric keys to enter the
designated 4-digit Remote Test ID.
NOTE: If you want to revise the
entered number, press the [] or []
cursor key to move the cursor to the
number that you want to change.
4
Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 2. If you are finished making settings, press the Reset key to return to the initial mode.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Regi ster
settingbook
Print Report
Memor
OCT-11
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
FAX
Network
Enter using # key.
Remote Test ID Back
Enter Remote ID.
( 4 digits)
0000 .
To Next Page
Loading...
Need help?
General
