EasyManuals Logo

Kyocera KM-C3232E User Manual

Kyocera KM-C3232E
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Other Features of this Fax
5-28
2 If you entered the fax number with the numeric keys, press the [Next destinat.] ([Next dest.])
key.
9
Press the [Finish dest. Set] ([Dest. set]) key.
10
Select whether or not you want the
received documents to be printed out at
your fax (press the [On] key to have
them printed and the [Off] key to stop
print out), and whether or not you want
send a Transmission Report regarding
the results of the final transmissions to
the initial transmitting station (press the
[On] key to send a report and the [Off]
key to not send a report.).
11
Press the [Next] key.
If you selected to send a Transmission Report to the initial transmitting station, go to the next step. If
you selected NOT to send a report, proceed directly to step 14.
12
Enter the fax number of the initial transmitting station.
NOTE: You can use the numeric keys, one-touch keys and Chain dial keys to enter the fax number.
13
Press the [Finish dest. Set] ([Dest. set]) key.
14
Check the registered information.
Each item can be modified.
15
Press the [OK] key. The message display will return to the same screen as was displayed in step 4.
If you want to continue registering other F-Code Relay Boxes, repeat steps 4 through 15. Once you
are finished registering F-Code Relay Boxes, press the Reset key.
Modifying or Deleting F-Code Relay Boxes
Perform the following procedure when you want to add or delete final destinations or change other
information registered under any F-Code Relay Box, as well as when you want to completely delete
one of those boxes.
NOTE: In order to modify the contents of or completely delete an F-Code Relay Box, it is necessary
to enter the corresponding F-Code password during the procedure.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Perform steps 1 through 3 of Registering New F-Code Relay Boxes on page 5-26.
2
Press the key which displays the
subaddress for the F-Code Relay Box
you want to modify or delete.
Local print/return
Off
Print Here
Back
Register box
On
02.Subaddress relay box
Off
On
Return report
Subaddress relay box
Register box
8888.
0715.
3333.

Table of Contents

Other manuals for Kyocera KM-C3232E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera KM-C3232E and is the answer not in the manual?

Kyocera KM-C3232E Specifications

General IconGeneral
BrandKyocera
ModelKM-C3232E
CategoryPrinter Accessories
LanguageEnglish

Related product manuals