Other Features of this Fax
5-62
2
Press the [Box] key.
3
Press the [Encryption box] key.
4
Press an unregistered key. The box
number will be displayed for all keys that
have already been registered.
5
Use the numeric keys to enter the 4-digit
number that you want to use as the
Encryption Box number.
6
Press the [Box. ID] key and enter the 4-digit number that you want to use for the Encryption Box ID.
NOTE: If you register ‘0000’ as the Encryption Box ID, it will not be necessary to enter an ID-code
when you print out documents from that Encryption Box.
7
Press the [Encryption Code] ([Encr. code]) key and use the numeric keys to enter the 2-digit Key
Code (01 - 20) that corresponds to the Encryption Key to be used for this Encryption Box.
8
Select whether or not you want
documents received into this Encryption
Box to be automatically printed out.
If you want to have received documents
printed out immediately after reception,
select [On].
If you want to allow print out only when
the appropriate procedure is performed,
select [Off].
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
FAX
Network
Box type
Subaddress
conf. box
Register box
Subaddress
relay box
Encryption
box
Encryption box
Register box
9876.
0352.
Detail contents
Box. ID
Enter using # key.
Encryption
Code
Back
( 4 digits)
Register box
Box. No.
Off
On
Print on RX.
Encryption box
( 4 digits)
( 2 digits)
0000.
0000.
00 .
01.
# key.
To Next Page
Loading...
Need help?
General
