Network FAX Settings
9-11
18
Use the numeric keys to enter the
currently registered administrator
number.
NOTE: The factory default administrator number is either 2500 (25/25 ppm model), 3200 (32/25
ppm and 32/32 ppm models) or 4000 (40/35 ppm model). For more detailed information on the
administrator number, refer to the Advanced Operation Guide for your machine.
The Administrator Number input screen will not be displayed if Restricted Access is turned ON.
19
Enter the password using the English alphabet, numerals or other available symbols. (Maximum 31
digits)
NOTE: Refer to Entering Characters on page 2-15 when entering the password.
20
Once you are finished entering the password, press the [End] key. The message display will return
to the same screen as was displayed in step 11.
21
Press the [Close] key. The message display will return to the same screen as was displayed in step
3.
> Registering the save folder number (factory default setting: RX001 and TX001)
22
Press the [Saving Folder No.] ([No.of
save folder]) key.
23
Use the numeric keys to enter the save
folder number in which documents which
have been received using the Network
FAX functions will be saved.
NOTE: [Clear] key: Press this key when you want to reenter the number.
[Stop] key: Press this key when you want to cancel the registration procedure and return the touch
panel to the screen in step 3.
24
Press the [Save Tx. original] key and use the numeric keys to enter the save folder number for
transmitted documents in the same manner as you did for received documents.
Enter the administrator number.
Admin. Number Check Back
Enter password
Regist'd contents cnf
Register Network FAX.
IP addr./
Host name
Admin.
E-mail ad.
File name
Saving
Folder No.
Receiv
To Next Page
Loading...
Need help?
General
