Fax Operation (Various Functions)
3-14
4
Press the [Chain] key.
5
Use the numeric keys to enter the
desired chain dial number. (Maximum 32
digits)
NOTE: [] and [] cursor keys...Use to move the cursor.
[Delete] key...Press to delete the character that the cursor is currently under. (When the cursor is at
the last space, the previous character will be deleted.)
[Space] key...Press to enter a space.
[Pause] key...Press to enter a slight pause (indicated by a hyphen) at that point in dialing.
6
Press the [Next] key.
7
Enter the desired name for the chain dial key. (Maximum 20 characters)
NOTE: In order to enter characters, refer to Entering Characters on page 2-15.)
8
Check the registered information. If you
want to change any portion of it, press
the key that corresponds to the desired
item and change the information as
desired.
9
To register this chain dial key with the entered information as is, press the [OK] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue registering other one-touch keys, repeat steps 3 through 9.
10
If you are finished making settings, press the Reset key to return to the initial mode. (C) will be
displayed next to the registered speed-dial key.
Dial type
Group
Register the dial.
33600bpsOne-touch
key
Chain
Program
Back
Enter using # key.
Fax # Back
Register the dial.
Chain
(MAX. 32 digits)
0003.
Delete
SpacePause
Regist'd contents cnf
800
FREE.
Register the dial.
Press confirmation key after checking registered contents.
Name
Chain0003.
To Next Page
Loading...
Need help?
General
