Fax Operation (Various Functions)
3-21
> Modifying destination information
6
The currently registered information will be displayed.
• If you want to delete a fax number(s), press the corresponding dial key (or keys) and then go to
the next step.
• If you want to add a fax number(s), press the [Add] key and then go directly to step 9.
• If you want to change a fax number, press the corresponding dial key and then proceed directly
to step 11.
Deleting fax numbers
7
Press the [Delete] key.
8
Press the [Yes] key. The message display will return to the same screen as was displayed in step 6
and you can continue to delete, add or change other fax numbers. To do so, repeat steps 6 through
13.
If you are finished with this procedure, press the [Close] key and go to step 14.
Adding fax numbers
9
Enter the additional fax number(s).
NOTE: You can enter the fax number(s) using the numeric keys, abbreviated numbers, one-touch
keys, group dial keys and the address book. Chain dial keys can be used as well.
In order to enter multiple destinations with the numeric keys, press the [Next destinat.] ([Next dest.])
key after you enter each fax number.
10
Press the [Finish dest. Set] ([Dest. set]) key. The message display will return to the same screen as
was displayed in step 6 and you can continue to delete, add or change other fax numbers. To do so,
repeat steps 6 through 13.
If you are finished with this procedure, press the [Close] key and go to step 14.
Changing fax numbers
11
Press the [Change] key.
Close
To Next Page
Loading...
Need help?
General
