2L6/2N6/2N5/2N4
1-4-248
8
Scopper guide Check that the scopper guide is
smoothly operative.
If the scopper guide does not rotate smoothly,
re-install.
9
Conveying roller
(before and after
portions of
scanning)
Check whether the conveying
roller is dirty.
If the conveying roller is dirty, clean.
10
Drive belt Check if the drive belt is jumping
gear teeth.
If the drive belt is jumping gear teeth, re-mount
the belt tensioner.
Defective part Check description Corrective Action
To Next Page
Loading...
