2L6/2N6/2N5/2N4
1-4-38
DF conveying sensor
non arrival jam
(J610X)
DF conveying sensor
stay jam (J611X)
2. Check if the jammed
paper has a dog-ear.
2.If a down-curled sheet is jammed at the DF
conveying guide ribs by being dog-eared, replace the
DF conveying lower guide.
3. Check if dog-ears are
caused within the
punch unit.
If a welding protrusion on the coveying side causes
paper to be trapped, try replacing the punch unit.
DF intermediate sen-
sor stay jam (J631X)
DF main tray ejection
stay JAM (J641X)
DF eject sensor non
arrival jam (J6500)
DF eject sensor stay
jam (J651X)
1. If there is not the
jammed paper which is
causing J631, at the
paper processing area,
check to see if the
actuator (DF middle
sensor) is operative.
Re-mount the actuator.
Jam types Check description Corrective measures
To Next Page
Loading...
