2L6/2N6/2N5/2N4
1-4-41
DF drum sensor stay
jam (J6610)
1. Check if the size and
orientation of the
original document and
the paper used match.
If not matched, load the paper in the size and
orientation configured for the cassette or the manual
feed tray.
2. Check to see if the
actuator (DF drum
sensor) is operative
without hinderance.
If the return spring has been fallen off of the fixing
position, fix it properly.If the actuator won't operate
smoothly, replace.
Center-folding unit
conveying stay JAM
(J6710)
Center-folding unit
conveying sensor stay
JAM (J7710)
If paper is jammed before
reaching the center-folding
unit, check that the drive
train gears are in mesh.
If the drive transmission gears are not in mesh,
replace the pivot pin of the CF lock lever and the DF
fixing pin.
Jam types Check description Corrective measures
To Next Page
Loading...
