2KN/2KP
1-3-85
U508
Setting the LDAP
Description
Enables or disables an LDAP server.
Purpose
To change the setting to ON when use of an LDAP server is requested.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Initial setting: OFF
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
U510
Setting the enterprise mode
Description
Sets whether or not the enterprise mode setting is enabled if an optional network scanner is installed.
Purpose
According to user request, changes the setting.
Supplement
It is not possible to turn setting simultaneously with U511 (Setting scan To FTP) or U512 (Setting scan to
SMB) to ON.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Initial setting: OFF
2. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON LDAP server is enabled.
OFF LDAP server is disabled.
Display Description
ON Enterprise mode setting is enabled.
OFF Enterprise mode setting is disabled.
To Next Page
Loading...
