Kyocera TASKalfa 620 - Page 124

2KN/2KP
1-3-86
U511
Setting scan To FTP
Description
Sets whether or not scan to FTP setting is enabled if an optional network scanner is installed.
Purpose
According to user request, changes the setting.
Supplement
It is not possible to turn setting simultaneously with U510 (Setting the enterprise mode) to ON.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Initial setting: ON
2. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
U512
Setting scan To SMB
Description
Sets whether or not scan to SMB setting is enabled if an optional network scanner is installed.
Purpose
According to user request, changes the setting.
Supplement
It is not possible to turn setting simultaneously with U510 (Setting the enterprise mode) to ON.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Initial setting: OFF
2. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON Scan to FTP setting is enabled.
OFF Scan to FTP setting is disabled.
Display Description
ON Scan to SMB setting is enabled.
OFF Scan to SMB setting is disabled.