2KN/2KP
1-5-63
(5) Detaching and refitting the fuser thermostat 1 and 2
Follow the procedure below to check or replace the fuser thermostat 1 and 2.
Caution
Use the specified thermostat 1 and 2 for replacement.
Procedure
1. Remove the fuser unit (see page 1-5-58).
2. Remove the upper fuser cover (see page 1-
5-60).
3. Remove four receptacles from the fuser
thermostat 1.
4. Remove five receptacles from the fuser ther-
mostat 2.
Figure 1-5-132
( ):Wire color
Fuser
thermostat 1
Fuser
thermostat 1
Fuser
thermostat 2
Fuser
thermostat 2
Recep-
tacle
(White)
Recep-
tacle
(Red)
Recep-
tacle
(Black)
Recep-
tacles
Receptacles
Receptacles
To Next Page
Loading...
