Kyocera TASKalfa 620 - Page 51

2KN/2KP
1-3-13
U030
Checking the operation of the motors
Description
Drives each motor.
Description
To check the operation of each motor.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the motor to be operated. The selected item is displayed in reverse and the operation starts.
Two or more motors can be selected.
3. To stop operation, an item is selected again or press the stop/clear key.
Completion
Press the stop/clear key after operation stops. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Motor
MAIN_TFR_EJE The drive motor (DM), transfer motor (TRM) and fuser motor (FM) are
turned ON.
REG MOT The registration motor (RM) is turned ON.
FEED MOT H The feed motor (FDM) is turned ON high speed.
BP CV MOT H The MP feed motor (MPFDM) is turned forwarding ON high speed.
BP FD MOT H The MP feed motor (MPFDM) is turned reversing ON high speed.
PF MOT3 H Paper feed motor 3 (PFM3) is turned ON high speed.
PF MOT4 H Paper feed motor 4 (PFM4) is turned ON high speed.
VF MOT H The vertical feed motor (VFDM) is turned ON high speed.
PF MOT1 Paper feed motor 1 (PFM1) is turned forwarding ON.
PF MOT2 Paper feed motor 2 (PFM2) is turned ON.
DECK FD MOT Paper feed motor 1 (PFM1) is turned reversing ON.
DUP SB MOT The duplex switchback motor (DUPSBM) is turned ON.
DUP SD REG The duplex side registration motor (DUPSRM) is turned ON.
DUP FD MT L The duplex feed motor (DUPFDM) is turned ON low speed.
FEED MOT L The feed motor (FDM) is turned ON low speed.
BP CV MOT L The MP feed motor (MPFDM) is turned ON low speed.
PF MOT3 L Paper feed motor 3 (PFM3) is turned ON low speed.
PF MOT4 L Paper feed motor 4 (PFM4) is turned ON low speed.
VF MOT L The vertical feed motor (VFDM) is turned ON low speed.
MAIN MOT The drive motor (DM) is turned ON.
TFR MOT The transfer motor (TRM) is turned ON.
EJECT MOT The transfer motor (FM) is turned ON.
DUP FD MT H The duplex feed motor (DUPFDM) is turned ON high speed.
DLP MOT The developing motor (DEVM) is turned ON.