2KN/2KP
1-3-14
U031
Checking switches for paper conveying
Description
Displays the ON/OFF status of each paper detection switch on the paper conveying path.
Purpose
To check the operation of the switches for paper conveying.
Method
1. Press the start key. A list of switches, the on-off status of which can be checked, are displayed.
2. Turn each switch on and off manually to check the status.
When the on-status of a switch is detected, that switch is displayed in reverse.
*Optional.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Sensor
REG SW Registration switch (RSW)
FEED-A SW Feed switch 1 (FSW1)
FEED-B SW E Feed switch 2 (FSW2)
FD EJ SW Switchback exit switch (SBESW)
EJECT SW Exit switch (ESW)
FEED-B SW D Feed switch 2 (FSW2)
LCF SW A Deck conveying switch 2 (DKCSW2)
LCF SW B Deck conveying switch 1 (DKCSW1)
FEED-C SW Feed switch 3 (FSW3)
FEED-D SW Feed switch 4 (FSW4)
FEED-E SW Feed switch 5 (FSW5)
LDECK FD SW Side feeder feed switch (SFFSW)*
FS SW Feedshift switch (FSSW)
DUP JAM SW Duplex jam detection switch (DUPJSW)
DUP FEED SW Duplex feed switch (DUPFSW)
DUP CV SW A Duplex conveying switch 1 (DUPCSW1)
DUP CV SW B Duplex conveying switch 2 (DUPCSW2)
DUP CV SW C Duplex conveying switch 3 (DUPCSW3)
PE SW1 Paper empty switch 1 (PESW1)
PE SW2 Paper empty switch 2 (PESW2)
PE SW3 Paper empty switch 3 (PESW3)
PE SW4 Paper empty switch 4 (PESW4)
LDECK PE SW Side feeder paper empty switch (SFPESW)*
LIM SW1 Lift limit switch 1 (LILSW1)
LIM SW2 Lift limit switch 2 (LILSW2)
LIM SW3 Lift limit switch 3 (LILSW3)
LIM SW4 Lift limit switch 4 (LILSW4)
LCF-A-1 SW Timing switch 2 (TIMSW2)
FEED-D-1 SW Timing switch 3 (TIMSW3)
FEED-E-1 SW Timing switch 4 (TIMSW4)
LCF-B-1 SW Timing switch 1 (TIMSW1)
To Next Page
Loading...
