2KN/2KP
1-3-19
U052
Adjusting duplex
Description
Adjusts the side registration of the duplex section.
Purpose
To check the operation of the duplex side registration motor.
Method
1. Press the start key. The screen for executing is displayed.
2. Change the value using the cursor up/down keys.
Increasing the value makes wider, while decreasing the value makes narrower.
3. Press the start key. The value is set.
4. Press the interrupt key.
5. Press the start key to output the test pattern.
6. Open the front cover.
7. Pull the duplex unit out and check the position of duplex side registration guide.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Maintenance
item No.
Description
Description Setting range Initial setting Change in value per step
Adjustment of side registration -128 to 127 -6 0.7 mm
To Next Page
Loading...
