2KN/2KP
1-3-32
U073
Checking the scanner operation
Description
Simulates the scanner operation under the arbitrary conditions.
Purpose
To check the scanner operation.
Implementation
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be operated. The selected item is displayed in reverse.
Setting: Scanning size
1. Select SCANNER MOT in the screen for selecting an item.
2. Press the start key.
3. Change the setting using the cursor up/down keys.
Original sizes for each setting in SIZE
4. Press the start key. The setting is set. Scanning starts under the selected conditions.
5. To stop operation, press the stop/clear key.
Completion
Press the stop/clear key with the scanning operation stopped.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Operation
SCANNER MOT Scanner operation
HOME POTION Home position operation
DP READING DP scanning position operation
DUST CHECK Dust adhesion check operation with lamp on
Display Operating conditions Setting range
ZOOM Magnification 25 to 400%
SIZE Original size See below.
LAMP On and off of the exposure lamp 0 (off) or 1 (on)
Setting Paper size Setting Paper size
5000 A4 5000 A5R
4300 B5 7800 Folio
5100
11
" x 8 1/2"
10200
11
" x 17"
10000 A3 9000
11
" x 15"
8600 B4 8400
8
1/2" x 14"
7100 A4R 6600
8
1/2" x 11"
6100 B5R 5100
5
1/2" x 8 1/2"
To Next Page
Loading...
