Kyocera TASKalfa 650c

2.SETTING ITEMS (ADMIN)
Setting Network Functions 99
2 SETTING ITEMS (ADMIN)
3
Specify the following items as required and press [OK].
ENABLE IPX/SPX — Press [ENABLE] to enable the IPX/SPX protocol, or [DISABLE] to disable the IPX/SPX
protocol.
FRAME TYPE — Press [AUTO] to automatically detect the appropriate frame type, or press another frame type
button. If you do not know the frame type that must be used, select [AUTO].
4
Continue to another network setting if required, then press [APPLY NOW].
The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.