2.SETTING ITEMS (ADMIN)
Setting General Functions 85
2 SETTING ITEMS (ADMIN)
Setting the panel calibration
When the buttons on the touch panel are hardly to be pressed, this function allows you to adjust the position of each
button.
1
Press [GENERAL] in the Admin menu.
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.63 “Entering Admin Menu”
2
Press [PANEL CALIBRATION].
The panel calibration operation screen (1) is displayed.
3
Touch the center of the + mark with a stylus, referring to the message displayed on the
touch panel.
The panel calibration operation screen (2) is displayed.
To Next Page
Loading...
