1 SETTING ITEMS (USER)
Setting Fax Functions 19
Setting Fax Functions
You can change the initial settings (defaults) for fax and Internet Fax jobs.
If the FAX Unit (optional) is not installed, only three options are available: “RESOLUTION”, “ORIGINAL MODE” and
“EXPOSURE”. For details on other fax options, refer to the MP-80/FAX System (T) Operator’s Manual for FAX Unit.
If the FAX Unit (optional) is not installed, the setting items in this menu are applied to Internet Fax transmission jobs.
1
Press [FAX] in the USER menu.
The FAX screen is displayed.
To display the USER menu, see the following page:
P.8 “Entering User Menu”
2
Specify the following items as you require and press [OK].
RESOLUTION — Press the desired mode button.
ORIGINAL MODE — Press the desired mode button.
EXPOSURE — Press the or button to specify the default exposure manually, or press [AUTO] to select
auto mode for the default exposure mode.
The default settings are changed as specified.
To Next Page
Loading...
