2 SETTING ITEMS (ADMIN)
72 Setting General Functions
Setting the energy saver modes
The following energy saver modes are available in this menu.
y Weekly timer
Using the built-in weekly timer, you can have the equipment automatically turned ON and OFF at specified times. For
instance, you can set the timer for the starting time and closing time of your office so that the copier will automatically
turn itself ON and OFF at those specified times.
You can turn on the power by simply pressing the [START] button on the control panel when the device is in the sleep
mode by the weekly timer.
When the power switch is turned off, the weekly timer does not work.
y Auto power save mode
This function allows the equipment to automatically go into the energy saving mode if it is left inactive for a certain
period of time.
y Sleep mode
This function puts the equipment into the sleep mode (unnecessary electricity is cut off at standby) if it is left inactive
for a certain period of time.
Neither [AUTO POWER SAVE] nor [SLEEP MODE] is available for the European version.
1
Press [GENERAL] in the ADMIN menu.
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.63 “Entering Admin Menu”
2
Press [ENERGY SAVER].
The ENERGY SAVER menu is displayed.
To Next Page
Loading...
