Kyocera TASKalfa 650c

2 SETTING ITEMS (ADMIN)
124 Setting Internet Fax Functions
Setting Internet Fax Functions
This function allows you to set the following items.
y Internet Fax Message Properties
You can configure the following message properties of Internet Faxes that will be sent by Internet Fax transmission.
- FROM ADDRESS
- FROM NAME
-BODY
y Internet Fax Fragmentation
You can send the Internet Fax job split into the fragment size specified. This option can reduce transmission errors
caused by network traffic problems.
y Internet Fax Body String Transmission
You can specify whether the body string will be transmitted or not.
1
Press [INTERNET FAX] in the ADMIN menu.
The INTERNET FAX screen is displayed.
To display the ADMIN menu, see the following page:
 P.63 “Entering Admin Menu”
2
Specify the following items as required and press [OK].
[FROM ADDRESS] — Press this button to enter the e-mail address of this equipment.
[FROM NAME] — Press this button to enter the identification name of this equipment.
[BODY] — Press this button to enter the body message.
FRAGMENT PAGE SIZE (KB) — Press the desired fragment size button. Press [NONE] to disable the
fragmentation.
BODY STRING TRANSMISSION — Press [ENABLE] to enable the body string transmission, or [DISABLE] to
disable the body string transmission.
To enable Internet Fax, you must enter an e-mail address to the [FROM ADDRESS] box.
When you press each button ([FROM ADDRESS], [FROM NAME] and [BODY]), the on-screen keyboard is
displayed. Enter a value using the keyboard and digital keys, and press [OK] to set the entry.