Kyocera TASKalfa 650c

2.SETTING ITEMS (ADMIN)
Setting Network Functions 111
2 SETTING ITEMS (ADMIN)
4
Continue to another network setting if required, then press [APPLY NOW].
The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.
 IPsec (IP security) setting
When the IPSec Enabler (optional) is adopted, the encrypted communication is enabled using the IPsec (IP Security
Protocol).
The following operations are available in this menu.
y Viewing the IPsec policy name currently applied
y Enabling / Disabling IPsec communication
y Flushing IPsec session
Settings required for IPsec such as entry of IPsec policies can be performed using COMMAND CENTER. For details,
refer to the COMMAND CENTER Guide.
[IPsec] is available only when the IPSec Enabler (optional) is adopted.
1
Press [NETWORK] in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
 P.63 “Entering Admin Menu”