Kyocera TASKalfa 650c

2 SETTING ITEMS (ADMIN)
74 Setting General Functions
3
Make settings for the weekly timer.
1) Press the desired day of the week button.
2) Press [ON] to enter the time the device wakes up from the sleep mode.
Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.
3) Press [OFF] to enter the time to put the device into the sleep mode.
Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.
4) Press [OK] to save the settings.
y If you want to clear an entered time, press the [CLEAR] button on the control panel.
y If you want to put the equipment into the sleep mode during the entire day, enter the same time in both the
[ON] and [OFF] boxes.
Example) When you enter “0:00” in both the [ON] and [OFF] boxes for [SUN],
the equipment automatically goes into the sleep mode at the [OFF] time specified for [SAT]. The sleep mode
is kept until the [ON] time specified for [MON] comes.
y If you do not want to put the equipment into the sleep mode during the entire day, make settings for the
desired day of the week button as follows:
[ON]: 0:00 / [OFF]: 24:00
The equipment does not go into the sleep mode during the entire day, which is activated by the weekly timer
function. However, the equipment automatically goes into the sleep mode according to the time value set for
[SLEEP MODE] (or the preset time value for activating the sleep mode), if it is left inactive for a certain
period of time.
Setting the auto power save mode
1
Press [AUTO POWER SAVE].
The AUTO POWER SAVE screen is displayed.