3 MANAGING COUNTERS (COUNTER MENU)
172 Managing Department Codes
Resetting the counter for each department
This function allows you to reset the counter for the specified department code.
1
In the DEPT. MANAGEMENT menu, press [DEPARTMENT REGISTRATION].
The DEPARTMENT CODE screen is displayed.
For instructions on how to display the screen above, see the following page:
P.160 “Logging on as administrator”
2
Press the department button whose counter you want to reset and press [RESET
COUNTERS].
The clear confirmation screen is displayed.
If the touch panel does not display the department code whose counter you want to clear, press to display
the next screen.
3
Press [YES] to clear the department code counter.
Press [NO] to cancel the clear operation.
To Next Page
Loading...
