2 SETTING ITEMS (ADMIN)
108 Setting Network Functions
Setting the Ethernet speed
This function allows you to specify the ethernet speed.
1
Press [NETWORK] in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.63 “Entering Admin Menu”
2
Press [ETHERNET].
The ETHERNET screen is displayed.
3
Press [AUTO] to automatically detect the appropriate ethernet speed, or press another
ethernet speed button, then press [OK].
y When you select a specific ethernet speed, you must select the same ethernet speed as set in the
connected network. If you do not know the ethernet speed that must be used, select [AUTO].
y If the network is not stable, power OFF the equipment and then power it back ON.
To Next Page
Loading...
