Kyocera TASKalfa 650c

2 SETTING ITEMS (ADMIN)
Change User Password 135
Change User Password
When the MFP Local Authentication feature is used, administrators can change the authentication password assigned for
each user in case the user forgets the password.
1
Press [CHANGE USER PASSWORD] in the ADMIN menu.
The CHANGE USER PASSWORD screen is displayed.
To display the ADMIN menu, see the following page:
 P.63 “Entering Admin Menu”
[CHANGE USER PASSWORD] is available only when the MFP Local Authentication feature is enabled. For
more information about enabling this feature, refer to the COMMAND CENTER Guide.
2
Set a new password.
1) Press [USER NAME] to enter the user name for which the password is to be changed.
2) Press [NEW PASSWORD] to enter the new password.
3) Press [RETYPE NEW PASSWORD] to enter the new password again.
4) Press [OK] to save the new password.
y When you press each button ([USER NAME], [NEW PASSWORD] and [RETYPE NEW PASSWORD]), the
on-screen keyboard is displayed. Enter a value using the keyboard and digital keys, and press [OK] to set
the entry.
y The input password appears as asterisks (*) in the [NEW PASSWORD] and [RETYPE NEW PASSWORD]
boxes.