2 SETTING ITEMS (ADMIN)
76 Setting General Functions
Setting the calibration and registration display level
You can set whether this equipment will use the calibration and registration settings that are operated by a user or
administrator.
When you select the admin mode for the calibration display level, [CALIBRATION] under the USER menu disappears.
When you select the user mode for the calibration display level, [CALIBRATION] under the ADMIN menu disappears.
When you select the admin mode for the registration display level, [REGISTRATION] under the USER menu disappears.
When you select the user mode for the registration display level, [REGISTRATION] under the ADMIN menu disappears.
1
Press [GENERAL] in the Admin menu.
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.63 “Entering Admin Menu”
2
Press [DISPLAY LEVEL].
The DISPLAY LEVEL screen is displayed.
3
Press [USER] or [ADMIN] for each option and press [OK].
The display level setting is completed.
To Next Page
Loading...
