1 SETTING ITEMS (USER)
Setting Drawer 27
Setting Drawer
This function allows you to set the paper size and paper type for each drawer.
1
Press [DRAWER] in the USER menu.
The Drawer screen is displayed.
To display the USER menu, see the following page:
P.8 “Entering User Menu”
2
Press the drawer portion in the illustration to highlight the drawer for which you want
to change the paper size, and press the desired paper size button.
y The selected paper size is displayed in the drawer in the illustration.
y If you want to change the paper type from plain paper to another or want to specify the use purpose of paper in
the drawer, press [PAPER TYPE] and proceed to step 3.
y Selecting [AUTO (mm)] or [AUTO (inch)] allows the equipment to automatically detect the size of paper in the
drawer. To set A/B format paper such as A3 and A4, press [AUTO (mm)]. To set LT format paper such as LD
and LT, press [AUTO (inch)]. When paper is placed in the drawer, the equipment automatically detects the
paper size.
The equipment may fail to detect the paper size and indicates “UNDEF” for the drawer if the LT format paper is
placed in the drawer for which [AUTO (mm)] is set or vice versa. In this case, select the correct button.
To Next Page
Loading...
