Kyocera TASKalfa 650c - Maintenance From COMMAND CENTER

4 APPENDIX
192 List Print Format
NETWORK SETTING - SESSION - LDAP SESSION
Function Description User
ENABLE LDAP Shows whether the LDAP is enabled or disabled. NO
ENABLE SSL Shows whether the LDAP SSL is enabled or disabled. NO
NETWORK SETTING - SESSION - DNS SESSION
Function Description User
ENABLE DNS Shows whether the DNS is enabled or disabled. NO
PRIMARY DNS SERVER ADDRESS Shows the primary DNS server address if it has been set. NO
SECONDARY DNS SERVER ADDRESS Shows the secondary DNS server address if it has been
set.
NO
PRIMARY DNS SERVER ADDRESS (IPv6) Shows the primary DNS server IPv6 address if it has been
set.
NO
SECONDARY DNS SERVER ADDRESS (IPv6) Shows the secondary DNS server IPv6 address if it has
been set.
NO
NETWORK SETTING - SESSION - DDNS SESSION
Function Description User
ENABLE DDNS Shows whether the DDNS is enabled or disabled. NO
HOST NAME Shows the host name of this equipment. NO
DOMAIN NAME Shows the domain name of this equipment. NO
NETWORK SETTING - SESSION - SMB SESSION
Function Description User
SMB SERVER PROTOCOL Shows whether the SMB protocol is enabled or disabled. NO
ENABLE IPv6 Shows whether the IPv6 protocol is enabled or disabled. NO
NETBIOS NAME Shows the NetBIOS name of this equipment. NO
LOGON Shows the logon setting. NO
WORKGROUP Shows the workgroup of this equipment. NO
DOMAIN Shows the domain name of this equipment. NO
PRIMARY DOMAIN CONTROLLER Shows the primary domain controller address if it has been
set.
NO
BACKUP DOMAIN CONTROLLER Shows the backup domain controller address if it has been
set.
NO
LOGON USER NAME Shows the logon user name of this equipment for the
domain if it has been set.
NO
PRIMARY WINS SERVER Shows the primary WINS server address if it has been set. NO
SECONDARY WINS SERVER Shows the secondary WINS server address if it has been
set.
NO
SMB SIGNING OF SMB SERVER Shows the setting of the SMB Signing of SMB Server. NO
SMB SIGNING OF SMB CLIENT Shows the setting of the SMB Signing of SMB Client. NO
NETWORK SETTING - SESSION - NETWARE SESSION
Function Description User
ENABLE BINDERY Shows whether the bindery mode is enabled or disabled. NO