1.SETTING ITEMS (USER)
Setting Scan Functions 21
1 SETTING ITEMS (USER)
3
Specify the following items as you require and press .
PREVIEW SETTING — Press [ON] to enable the preview function to preview the scans before you save or e-mail
them. Press [OFF] to disable the preview function.
INITIAL PREVIEW TYPE — Select [PAGE FIT] or [WIDTH FIT] for the preview screen.
OMIT BLANK PAGE ADJUSTMENT — Use and to select the appropriate sensitivity from 7 levels to
detect blank pages from the scanned data in a scan job. The higher the level is, the more likely the equipment is to
detect blank pages. For more information about the omit blank page function, refer to the Scanning Guide.
ACS ADJUSTMENT — Use the buttons to select the appropriate sensitivity from 7 levels to detect whether the
data scanned in the auto color scan mode is color or black. The higher the level is, the more likely the equipment is
to detect the scanned data as a color document.
IMAGE QUALITY FOR BLACK IN ACS — Press the desired mode button that applies when scanning a black
original in the auto color mode.
B/W ADJUSTMENT IN ACS — Press the or button to specify the exposure that applies when scanning a
black original in the auto color mode. If you move to the left, the black and white in an original will be scanned
lightly. If you move to the right, the black and white in an original will be scanned deeply.
4
Specify the following items as you require and press .
RESOLUTION — Select the corresponding button for the default resolution applied when scanning in color mode.
ORIGINAL MODE — Press the desired mode button applied for color scans.
EXPOSURE — Press the or button to specify the default exposure for color scans manually, or press
[AUTO] to select auto mode as the default exposure mode for color scans.
BACKGROUND ADJUSTMENT — Press the or button to specify the contrast for color scans. If you move
to the left, the background color will be lighter. If you move to the right, the background color will be darker.
To Next Page
Loading...
