2 SETTING ITEMS (ADMIN)
82 Setting General Functions
Setting the print calibration
1
Press the following buttons as required.
Press either of the following buttons.
y [600dpi PRINT]
Press this button to calibrate for the 600 dpi print jobs.
y [1200dpi PRINT]
Press this button to calibrate for the 1200 dpi print jobs.
2
Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the
calibration setting.
y When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous
screen.
y When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the
touch panel.
3
Place the printed chart face down on the glass with the bottom toward you and the top
left aligned against the original scale on the left side, so that two black rectangular
marks are placed on the left side.
To Next Page
Loading...
