13
3: Getting Started
Now that the installation is properly prepared, you are ready to inspect, install, and
certify the Logic+ Biosafety Cabinet. This Section covers how to:
Unpack and move the cabinet
Install the cabinet
Connect the electrical supply source
Connect the service lines
Connect to an exhaust system (optional)
Arrange certification of the cabinet
Tools required for installation of the cabinet include two 1/2" wrenches, a flat-blade
screwdriver, a #2 Phillips screwdriver, and a carpenter’s level.
Note: The cabinet models weigh between 400–700 lbs. (182-318 kg). The
shipping pallet allows for lifting with a mechanical lift truck or floor jack. If you must
lift the product manually, use at least six (6) persons and follow safe-lifting
guidelines.
To Next Page
Loading...
