Error Displayed in When
[
ERR-24
]
• Alphanumeric Writing • The set value is out of range.
• Daily Recipe Function • The Afternoon Start Time is programmed earlier than or equal to the Morning Start Time.
[
ERR-25
]
• Recipe Execution Activity • The loaded or unloaded weight has exceeded the limit programmed in the Tolerance.
To eliminate the error condition, press the OK key or unload/load the weight in excess/defect.
[
ERR-26
]
• All Activities • You are attempting to perform an operation, Procedure or Test that is not allowed.
Contact Customer Service for further Information.
[
ERR-27
]
• Recipe Programming Activity • The Ingredient/Unload Name File or the Identification Code File is full.
To eliminate the error condition, delete the Ingredient/Unload Names or Identification Codes of
the non-used Ingredients.
[
ERR-28
]
• Usage by Ingredient Function
• Usage by Pen Function
• All the totalizers are empty.
• Ingredients/Unloads Name
Archive Delete Function
• The File is empty.
• Print Report Function • The Archive of the selected Report is empty.
[
ERR-29
]
• Transfer data with T-Data8
Plug
• The data received by the T-Data8 Plug device is not congruent with the relative specifications of
the Daily Recipe.
To eliminate the error condition, press the OK key or press the Clear key to return to the Recipe
Programming Activity. Contact Customer Service for further Information.
[
ERR-30
]
• Recipe Execution Activity • The selected Daily Recipe has been already fully executed (both the morning and afternoon
execution).
[
ERR-31
]
• Recipe Execution Activity • You try to perform the Daily Recipe, but the morning execution has been already performed. To
return to the Recipe Programming Activity, press the Prog./Start key; to start the afternoon
execution, press the key OK.
user’s guide74
To Next Page
Loading...
Need help?
General