5.3.6 Fiamma Turbo Vent 40 X 40
a) Opening crank handle.
b) Fan speed selector.
c) Temperature selector.
d) Temperature sensor.
e) Intake/ventilation switch.
This roof light is provided with a thermostat for
automatic operation. To disable automatic operation,
position selector (b) to "OFF".
Automatic operation
1) Open the outer cover by means of crank (a).
2) Set the desired speed of the fan by means of selector
(b).
3) Set the direction of rotation of the fan through the
switch (e) (intake mode or ventilation mode).
4) Set the operating temperature by means of selector
(c). When the ambient temperature exceeds the set
temperature, the fan automatically starts running.
When the ambient temperature drops below the set
temperature, the fan stops.
Manual Operation
For manual operation, follow the same steps as for
automatic operation, setting minimum temperature
with selector (c).
5.3.7 Fiamma Turbo Vent 28 X 28
a) Opening crank handle.
b) Fan switch, three positions: intake, off, ventilation.
5 - WINDOWS AND ROOF LIGHTS
USER’S GUIDE
29
a
b
a
b
c
d
e
To Next Page
Loading...
