Manual handling of the bed
In case of malfunction or power failure, the bed can be
moved manually using the special handle (a) supplied
as standard equipment.
The handle must be inserted in to hole (b) located in the
cabinet under the bed surface, on the left side.
17.6.2 Bed above the dinette (B type)
a) Bed up control.
b) Bed down control.
17 - INTERNAL COMPONENTS
92
USER’S GUIDE
Before lowering the bed, it is necessary to lower the
dinette table (night position).
WARNING
When the vehicle is parked for a long time under the
sun, the bed must not remain in fully raised
position: leave a space of at least 10 cm between
the roof-light and the bed mattress.
WARNING
a
b
Control panel
Before lowering the bed, remove the headrest and
backrests on the dinette.
WARNING
Before lowering the bed, position the cab seats so
that they do not interfere with bed movement.
WARNING
b
a